CS6530 Lab 1: SimpleDB

Assigned: Thursday, Sep 7
Due: Tue, Sep 19 5:00 PM

In the lab assignments you will write a basic database management system called SimpleDB. For this lab, you will focus on implementing the core modules required to access stored data on disk; in future labs, you will add support for various query processing operators, as well as transactions, locking, and concurrent queries.

SimpleDB is written in Java. We have provided you with a set of mostly unimplemented classes and interfaces. You will need to write the code for these classes. We will grade your code by running a set of system tests written using JUnit. We have also provided a number of unit tests, which we will not use for grading but that you may find useful in verifying that your code works.

The remainder of this document describes the basic architecture of SimpleDB, gives some suggestions about how to start coding, and discusses how to hand in your lab.

We strongly recommend that you start as early as possible on this lab. It requires you to write a fair amount of code!

1. Getting started

These instructions are written for any other Unix-based platform (e.g., Linux, MacOS, etc.) In particular, you should be able to follow the following instructions from our server georgia.eng.utah.edu which is a unix server. Note that Ant and Java have been installed and properly configured on georgia.eng.utah.edu. Please obtain a georgia.eng.utah.edu user account and password from the TAs for your team (send an email to our TAs with your name, uid, and email address, for both yourself and your teammate). Because the code is written in Java, it should work under Windows as well, though the directions in this document may not apply. It does require Java 1.8.*

We have included Section 1.2 on working on the project with Eclipse.

Download the code from CS6530-lab1.tar.gz and untar it. For example:

$ wget http://www.cs.utah.edu/~lifeife/cs6530/CS6530-lab1.tar.gz
$ tar xvzf CS6530-lab1.tar.gz
$ cd CS6530-lab1

SimpleDB uses the Ant build tool to compile the code and run tests. Ant is similar to make, but the build file is written in XML and is somewhat better suited to Java code. Most modern Linux distributions include Ant.

To help you during development, we have provided a set of unit tests in addition to the end-to-end tests that we use for grading. These are by no means comprehensive, and you should not rely on them exclusively to verify the correctness of your project.

To run the unit tests use the test build target:

$ cd CS6530-lab1
$ # run all unit tests
$ ant test
$ # run a specific unit test
$ ant runtest -Dtest=TupleTest
You should see output similar to:
# build output...

test:
    [junit] Running simpledb.CatalogTest
    [junit] Testsuite: simpledb.CatalogTest
    [junit] Tests run: 2, Failures: 0, Errors: 2, Time elapsed: 0.037 sec
    [junit] Tests run: 2, Failures: 0, Errors: 2, Time elapsed: 0.037 sec

# ... stack traces and error reports ...

The output above indicates that two errors occurred during compilation; this is because the code we have given you doesn't yet work. As you complete parts of the lab, you will work towards passing additional unit tests. If you wish to write new unit tests as you code, they should be added to the test/simpledb directory.

For more details about how to use Ant, see the manual. The Running Ant section provides details about using the ant command. However, the quick reference table below should be sufficient for working on the labs.

CommandDescription
antBuild the default target (for simpledb, this is dist).
ant -projecthelpList all the targets in build.xml with descriptions.
ant distCompile the code in src and package it in dist/simpledb.jar.
ant testCompile and run all the unit tests.
ant runtest -Dtest=testnameRun the unit test named testname.
ant systemtestCompile and run all the system tests.
ant runsystest -Dtest=testnameCompile and run the system test named testname.
ant handinGenerate tarball for submission.

If you are under windows system and don't want to run ant tests from command line, you can also run them from eclipse. Right click build.xml, in the targets tab, you can see "runtest" "runsystest" etc. For example, select runtest would be equivalent to "ant runtest" from command line. Arguments such as "-Dtest=testname" can be specified in the "Main" Tab, "Arguments" textbox. Note that you can also create a shortcut to runtest by copying from build.xml, modifying targets and arguments and renaming it to, say, runtest_build.xml.

1.1. Running end-to-end tests

We have also provided a set of end-to-end tests that will eventually be used for grading. These tests are structured as JUnit tests that live in the test/simpledb/systemtest directory. To run all the system tests, use the systemtest build target:

$ ant systemtest

# ... build output ...

    [junit] Testcase: testSmall took 0.017 sec
    [junit] 	Caused an ERROR
    [junit] expected to find the following tuples:
    [junit] 	19128
    [junit] 
    [junit] java.lang.AssertionError: expected to find the following tuples:
    [junit] 	19128
    [junit] 
    [junit] 	at simpledb.systemtest.SystemTestUtil.matchTuples(SystemTestUtil.java:122)
    [junit] 	at simpledb.systemtest.SystemTestUtil.matchTuples(SystemTestUtil.java:83)
    [junit] 	at simpledb.systemtest.SystemTestUtil.matchTuples(SystemTestUtil.java:75)
    [junit] 	at simpledb.systemtest.ScanTest.validateScan(ScanTest.java:30)
    [junit] 	at simpledb.systemtest.ScanTest.testSmall(ScanTest.java:40)

# ... more error messages ...

This indicates that this test failed, showing the stack trace where the error was detected. To debug, start by reading the source code where the error occurred. When the tests pass, you will see something like the following:

$ ant systemtest

# ... build output ...

    [junit] Testsuite: simpledb.systemtest.ScanTest
    [junit] Tests run: 3, Failures: 0, Errors: 0, Time elapsed: 7.278 sec
    [junit] Tests run: 3, Failures: 0, Errors: 0, Time elapsed: 7.278 sec
    [junit] 
    [junit] Testcase: testSmall took 0.937 sec
    [junit] Testcase: testLarge took 5.276 sec
    [junit] Testcase: testRandom took 1.049 sec

BUILD SUCCESSFUL
Total time: 52 seconds

1.1.1 Creating dummy tables

It is likely you'll want to create your own tests and your own data tables to test your own implementation of SimpleDB. You can create any .txt file and convert it to a .dat file in SimpleDB's HeapFile format using the command:
$ java -jar dist/simpledb.jar convert file.txt N
where file.txt is the name of the file and N is the number of columns in the file. Notice that file.txt has to be in the following format:
int1,int2,...,intN
int1,int2,...,intN
int1,int2,...,intN
int1,int2,...,intN

...where each intN is a non-negative integer.

To view the contents of a table, use the print command:

$ java -jar dist/simpledb.jar print file.dat N

where file.dat is the name of a table created with the convert command, and N is the number of columns in the file.

1.2. Working in Eclipse

Eclipse is a graphical software development environment that you might be more comfortable with working in.

Setting the Lab Up in Eclipse

Note: that this class assumes that you are using the official Oracle release of Java (1.8.x). This is the default on MacOS X, and for most Windows Eclipse installs; but many Linux distributions default to alternate Java runtimes (like OpenJDK). Please make sure you use Java 1.8.x; If you don't switch, you may see spurious test failures in some of the performance tests in later labs.

Running Individual Unit and System Tests

To run a unit test or system test (both are JUnit tests, and can be initialized the same way), go to the Package Explorer tab on the left side of your screen. Under the "CS6530-lab1" project, open the "test" directory. Unit tests are found in the "simpledb" package, and system tests are found in the "simpledb.systemtests" package. To run one of these tests, select the test (they are all called *Test.java - don't select TestUtil.java or SystemTestUtil.java), right click on it, select "Run As," and select "JUnit Test." This will bring up a JUnit tab, which will tell you the status of the individual tests within the JUnit test suite, and will show you exceptions and other errors that will help you debug problems.

Running Ant Build Targets

If you want to run commands such as "ant test" or "ant systemtest," right click on build.xml in the Package Explorer. Select "Run As," and then "Ant Build..." (note: select the option with the ellipsis (...), otherwise you won't be presented with a set of build targets to run). Then, in the "Targets" tab of the next screen, check off the targets you want to run (probably "dist" and one of "test" or "systemtest"). This should run the build targets and show you the results in Eclipse's console window.

1.3. Implementation hints

Before beginning to write code, we strongly encourage you to read through this entire document to get a feel for the high-level design of SimpleDB.

You will need to fill in any piece of code that is not implemented. It will be obvious where we think you should write code. You may need to add private methods and/or helper classes. You may change APIs, but make sure our grading tests still run and make sure to mention, explain, and defend your decisions in your writeup.

In addition to the methods that you need to fill out for this lab, the class interfaces contain numerous methods that you need not implement until subsequent labs. These will either be indicated per class:

// Not necessary for lab1.
public class Insert implements DbIterator {
or per method:
public boolean deleteTuple(Tuple t) throws DbException {
    // some code goes here
    // not necessary for lab1
    return false;
}
The code that you submit should compile without having to modify these methods.

We suggest exercises along this document to guide your implementation, but you may find that a different order makes more sense for you. Here's a rough outline of one way you might proceed with your SimpleDB implementation:

1.4. Transactions, locking, and recovery

As you look through the interfaces we have provided you, you will see a number of references to locking, transactions, and recovery. You do not need to support these features in this lab, but you should keep these parameters in the interfaces of your code because you will be implementing transactions and locking in a future lab. The test code we have provided you with generates a fake transaction ID that is passed into the operators of the query it runs; you should pass this transaction ID into other operators and the buffer pool.

2. SimpleDB Architecture and Implementation Guide

SimpleDB consists of:

SimpleDB does not include many things that you may think of as being a part of a "database." In particular, SimpleDB does not have:

In the rest of this Section, we describe each of the main components of SimpleDB that you will need to implement in this lab. You should use the exercises in this discussion to guide your implementation. This document is by no means a complete specification for SimpleDB; you will need to make decisions about how to design and implement various parts of the system. Note that for Lab 1 you do not need to implement any operators (e.g., select, join, project) except sequential scan. You will add support for additional operators in future labs.

You may also wish to consult the JavaDoc for SimpleDB.

2.1. The Database Class

The Database class provides access to a collection of static objects that are the global state of the database. In particular, this includes methods to access the catalog (the list of all the tables in the database), the buffer pool (the collection of database file pages that are currently resident in memory), and the log file. You will not need to worry about the log file in this lab. We have implemented the Database class for you. You should take a look at this file as you will need to access these objects.

2.2. Fields and Tuples

Tuples in SimpleDB are quite basic. They consist of a collection of Field objects, one per field in the Tuple. Field is an interface that different data types (e.g., integer, string) implement. Tuple objects are created by the underlying access methods (e.g., heap files, or B-trees), as described in the next section. Tuples also have a type (or schema), called a tuple descriptor, represented by a TupleDesc object. This object consists of a collection of Type objects, one per field in the tuple, each of which describes the type of the corresponding field.

Exercise 1. Implement the skeleton methods in: At this point, your code should pass the unit tests TupleTest and TupleDescTest. At this point, modifyRecordId() should fail because you havn't implemented it yet.

2.3. Catalog

The catalog (class Catalog in SimpleDB) consists of a list of the tables and schemas of the tables that are currently in the database. You will need to support the ability to add a new table, as well as getting information about a particular table. Associated with each table is a TupleDesc object that allows operators to determine the types and number of fields in a table.

The global catalog is a single instance of Catalog that is allocated for the entire SimpleDB process. The global catalog can be retrieved via the method Database.getCatalog(), and the same goes for the global buffer pool (using Database.getBufferPool()).

Exercise 2. Implement the skeleton methods in:

At this point, your code should pass the unit tests in CatalogTest.

2.4. BufferPool

The buffer pool (class BufferPool in SimpleDB) is responsible for caching pages in memory that have been recently read from disk. All operators read and write pages from various files on disk through the buffer pool. It consists of a fixed number of pages, defined by the numPages parameter to the BufferPool constructor. In later labs, you will implement an eviction policy. For this lab, you only need to implement the constructor and the BufferPool.getPage() method used by the SeqScan operator. The BufferPool should store up to numPages pages. For this lab, if more than numPages requests are made for different pages, then instead of implementing an eviction policy, you may throw a DbException. In future labs you will be required to implement an eviction policy.

The Database class provides a static method, Database.getBufferPool(), that returns a reference to the single BufferPool instance for the entire SimpleDB process.

Exercise 3. Implement the getPage() method in: We have not provided unit tests for BufferPool. The functionality you implemented will be tested in the implementation of HeapFile below. You should use the DbFile.readPage method to access pages of a DbFile.

2.5. HeapFile access method

Access methods provide a way to read or write data from disk that is arranged in a specific way. Common access methods include heap files (unsorted files of tuples) and B-trees; for this assignment, you will only implement a heap file access method, and we have written some of the code for you.

A HeapFile object is arranged into a set of pages, each of which consists of a fixed number of bytes for storing tuples, (defined by the constant BufferPool.PAGE_SIZE), including a header. In SimpleDB, there is one HeapFile object for each table in the database. Each page in a HeapFile is arranged as a set of slots, each of which can hold one tuple (tuples for a given table in SimpleDB are all of the same size). In addition to these slots, each page has a header that consists of a bitmap with one bit per tuple slot. If the bit corresponding to a particular tuple is 1, it indicates that the tuple is valid; if it is 0, the tuple is invalid (e.g., has been deleted or was never initialized.) Pages of HeapFile objects are of type HeapPage which implements the Page interface. Pages are stored in the buffer pool but are read and written by the HeapFile class.

SimpleDB stores heap files on disk in more or less the same format they are stored in memory. Each file consists of page data arranged consecutively on disk. Each page consists of one or more bytes representing the header, followed by the page size bytes of actual page content. Each tuple requires tuple size * 8 bits for its content and 1 bit for the header. Thus, the number of tuples that can fit in a single page is:

tuples per page = floor((page size * 8) / (tuple size * 8 + 1))

Where tuple size is the size of a tuple in the page in bytes. The idea here is that each tuple requires one additional bit of storage in the header. We compute the number of bits in a page (by mulitplying page size by 8), and divide this quantity by the number of bits in a tuple (including this extra header bit) to get the number of tuples per page. The floor operation rounds down to the nearest integer number of tuples (we don't want to store partial tuples on a page!)

Once we know the number of tuples per page, the number of bytes required to store the header is simply:

headerBytes = ceiling(tupsPerPage/8)

The ceiling operation rounds up to the nearest integer number of bytes (we never store less than a full byte of header information.)

The low (least significant) bits of each byte represents the status of the slots that are earlier in the file. Hence, the lowest bit of the first byte represents whether or not the first slot in the page is in use. Also, note that the high-order bits of the last byte may not correspond to a slot that is actually in the file, since the number of slots may not be a multiple of 8. Also note that all Java virtual machines are big-endian.

Exercise 4. Implement the skeleton methods in:

Although you will not use them directly in Lab 1, we ask you to implement getNumEmptySlots() and isSlotFree() in HeapPage. These require pushing around bits in the page header. You may find it helpful to look at the other methods that have been provided in HeapPage or in src/simpledb/HeapFileEncoder.java to understand the layout of pages.

You will also need to implement an Iterator over the tuples in the page, which may involve an auxiliary class or data structure.

At this point, your code should pass the unit tests in HeapPageIdTest, RecordIDTest, and HeapPageReadTest.

After you have implemented HeapPage, you will write methods for HeapFile in this lab to calculate the number of pages in a file and to read a page from the file. You will then be able to fetch tuples from a file stored on disk.

Exercise 5. Implement the skeleton methods in:

To read a page from disk, you will first need to calculate the correct offset in the file. Hint: you will need random access to the file in order to read and write pages at arbitrary offsets. You should not call BufferPool methods when reading a page from disk.

You will also need to implement the HeapFile.iterator() method, which should iterate through through the tuples of each page in the HeapFile. The iterator must use the BufferPool.getPage() method to access pages in the HeapFile. This method loads the page into the buffer pool and will eventually be used (in a later lab) to implement locking-based concurrency control and recovery. Do not load the entire table into memory on the open() call -- this will cause an out of memory error for very large tables.

At this point, your code should pass the unit tests in HeapFileReadTest.

2.6. Operators

Operators are responsible for the actual execution of the query plan. They implement the operations of the relational algebra. In SimpleDB, operators are iterator based; each operator implements the DbIterator interface.

Operators are connected together into a plan by passing lower-level operators into the constructors of higher-level operators, i.e., by 'chaining them together.' Special access method operators at the leaves of the plan are responsible for reading data from the disk (and hence do not have any operators below them).

At the top of the plan, the program interacting with SimpleDB simply calls getNext on the root operator; this operator then calls getNext on its children, and so on, until these leaf operators are called. They fetch tuples from disk and pass them up the tree (as return arguments to getNext); tuples propagate up the plan in this way until they are output at the root or combined or rejected by another operator in the plan.

For this lab, you will only need to implement one SimpleDB operator.

Exercise 6. Implement the skeleton methods in:

This operator sequentially scans all of the tuples from the pages of the table specified by the tableid in the constructor. This operator should access tuples through the DbFile.iterator() method.

At this point, you should be able to complete the ScanTest system test. Good work!

You will fill in other operators in subsequent labs.

2.7. A simple query

The purpose of this section is to illustrate how these various components are connected together to process a simple query. Suppose you have a data file, "some_data_file.txt", with the following contents:

1,1,1
2,2,2 
3,4,4

You can convert this into a binary file that SimpleDB can query as follows:

java -jar dist/simpledb.jar convert some_data_file.txt 3

Here, the argument "3" tells conver that the input has 3 columns.

The following code implements a simple selection query over this file. This code is equivalent to the SQL statement SELECT * FROM some_data_file.

package simpledb;
import java.io.*;

public class test {

    public static void main(String[] argv) {

        // construct a 3-column table schema
        Type types[] = new Type[]{ Type.INT_TYPE, Type.INT_TYPE, Type.INT_TYPE };
        String names[] = new String[]{ "field0", "field1", "field2" };
        TupleDesc descriptor = new TupleDesc(types, names);
        
        // create the table, associate it with some_data_file.dat
        // and tell the catalog about the schema of this table.
        HeapFile table1 = new HeapFile(new File("some_data_file.dat"), descriptor);
        Database.getCatalog().addTable(table1, "test");
        
        // construct the query: we use a simple SeqScan, which spoonfeeds
        // tuples via its iterator.
        TransactionId tid = new TransactionId();
        SeqScan f = new SeqScan(tid, table1.getId());
        
        try {
            // and run it
            f.open();
            while (f.hasNext()) {
                Tuple tup = f.next();
                System.out.println(tup);
            }
            f.close();
            Database.getBufferPool().transactionComplete(tid);
        } catch (Exception e) {
            System.out.println ("Exception : " + e);
        }
    }

}

The table we create has three integer fields. To express this, we create a TupleDesc object and pass it an array of Type objects, and optionally an array of String field names. Once we have created this TupleDesc, we initialize a HeapFile object representing the table stored in some_data_file.dat. Once we have created the table, we add it to the catalog. If this were a database server that was already running, we would have this catalog information loaded. We need to load it explicitly to make this code self-contained.

Once we have finished initializing the database system, we create a query plan. Our plan consists only of the SeqScan operator that scans the tuples from disk. In general, these operators are instantiated with references to the appropriate table (in the case of SeqScan) or child operator (in the case of e.g. Filter). The test program then repeatedly calls hasNext and next on the SeqScan operator. As tuples are output from the SeqScan, they are printed out on the command line.

We strongly recommend you try this out as a fun end-to-end test that will help you get experience writing your own test programs for simpledb. You should create the file "test.java" in the src/simpledb directory with the code above, and place the some_data_file.dat file in the top level directory. Then run:
ant
java -classpath dist/simpledb.jar simpledb.test
Note that ant compiles test.java and generates a new jarfile that contains it.

3. Logistics

You must submit your code (see below) as well as a short (2 pages, maximum) writeup describing your approach. This writeup should:

3.1. Collaboration

This lab should be manageable for a single person, but if you prefer to work with a partner, this is also OK (which is the default setup in our class). Larger groups are not allowed. Please indicate clearly who you worked with, if anyone, on your individual writeup.

3.2. Submitting your assignment

To submit your code, please create a bitbucket repo for your project, name it as follows: cs6530fall17-teamX. Add CS6530-lab1 as a directory to your bitbucket repo. Add TAs bitbucket account to your repo (we will announce their bitbucket accounts in canvas). Stop editing your lab1 folder (and commit all your changes) before the due date and time. You may submit your code multiple times (i.e., git commit); we will use the latest version you submit that arrives before the deadline. Place the write-up in a file called answers.txt or answers.pdf in the top level of your CS6530-lab1 directory.

3.3. Submitting a bug

Please submit (friendly!) bug reports to the instructor and cc both TAs. When you do, please try to include:

3.4 Grading

85% of your grade will be based on whether or not your code passes the system test suite we will run over it. These tests will be a superset of the tests we have provided. Before handing in your code, you should make sure produces no errors (passes all of the tests) from both ant test and ant systemtest.

Important: before testing, we will replace your build.xml and the entire contents of the test directory with our version of these files. This means you cannot change the format of .dat files! You should also be careful changing our APIs. You should test that your code compiles the unmodified tests. In other words, we will untar your tarball, replace the files mentioned above, compile it, and then grade it. It will look roughly like this:


$ cd ./CS6530-lab1
[replace build.xml and test]
$ ant test
$ ant systemtest
[additional tests]

If any of these commands fail, we'll be unhappy, and, therefore, so will your grade.

An additional 15% of your grade will be based on the quality of your writeup and our subjective evaluation of your code.

We've had a lot of fun designing this assignment, and we hope you enjoy hacking on it!