Check the `README' file, it often has useful information that does not appear anywhere else in the directory.
GDB is a large and complicated program, and if you first starting to work on it, it can be hard to know where to start. Fortunately, if you know how to go about it, there are ways to figure out what is going on:
Comments explaining the function of macros defined in host, target, or native dependent files can be in several places. Sometimes they are repeated every place the macro is defined. Sometimes they are where the macro is used. Sometimes there is a header file which supplies a default definition of the macro, and the comment is there. This manual also has a list of macros (see section Host Conditionals, see section Target Conditionals, see section Native Conditionals, and see section Obsolete Conditionals) with some documentation.
next command. Do not use step or you
will quickly get distracted; when the function you are stepping through
calls another function try only to get a big-picture understanding
(perhaps using the comment at the beginning of the function being
called) of what it does. This way you can identify which of the
functions being called by the function you are stepping through is the
one which you are interested in. You may need to examine the data
structures generated at each stage, with reference to the comments in
the header files explaining what the data structures are supposed to
look like.
Of course, this same technique can be used if you are just reading the code, rather than actually stepping through it. The same general principle applies--when the code you are looking at calls something else, just try to understand generally what the code being called does, rather than worrying about all its details.
step
command invokes single-stepping. The command is invoked via command
tables (see `command.h'); by convention the function which actually
performs the command is formed by taking the name of the command and
adding `_command', or in the case of an info subcommand,
`_info'. For example, the step command invokes the
step_command function and the info display command invokes
display_info. When this convention is not followed, you might
have to use grep or M-x tags-search in emacs, or run GDB on
itself and set a breakpoint in execute_command.
bug-gdb. But never post a generic question like "I was
wondering if anyone could give me some tips about understanding
GDB"---if we had some magic secret we would put it in this manual.
Suggestions for improving the manual are always welcome, of course.
Good luck!
./gdb
./gdb, which works on Suns and such, you can copy `gdb' to
`gdb2' and then type ./gdb ./gdb2.
When you run gdb in the gdb source directory, it will read a
`.gdbinit' file that sets up some simple things to make debugging
gdb easier. The info command, when executed without a subcommand
in a gdb being debugged by gdb, will pop you back up to the top level
gdb. See `.gdbinit' for details.
If you use emacs, you will probably want to do a make TAGS after
you configure your distribution; this will put the machine dependent
routines for your local machine where they will be accessed first by
M-.
Also, make sure that you've either compiled gdb with your local cc, or
have run fixincludes if you are compiling with gcc.
When building support for a new host and/or target, much of the work you need to do is handled by specifying configuration files; see section Adding a New Configuration. Further work can be divided into "host-dependent" (see section Adding a New Host) and "target-dependent" (see section Adding a New Target). The following discussion is meant to explain the difference between hosts and targets.
Host refers to attributes of the system where GDB runs. Target refers to the system where the program being debugged executes. In most cases they are the same machine, in which case a third type of Native attributes come into play.
Defines and include files needed to build on the host are host support. Examples are tty support, system defined types, host byte order, host float format.
Defines and information needed to handle the target format are target dependent. Examples are the stack frame format, instruction set, breakpoint instruction, registers, and how to set up and tear down the stack to call a function.
Information that is only needed when the host and target are the same,
is native dependent. One example is Unix child process support; if the
host and target are not the same, doing a fork to start the target
process is a bad idea. The various macros needed for finding the
registers in the upage, running ptrace, and such are all in the
native-dependent files.
Another example of native-dependent code is support for features
that are really part of the target environment, but which require
#include files that are only available on the host system.
Core file handling and setjmp handling are two common cases.
When you want to make GDB work "native" on a particular machine, you have to include all three kinds of information.
The dependent information in GDB is organized into files by naming conventions.
Host-Dependent Files
Native-Dependent Files
Target-Dependent Files
At this writing, most supported hosts have had their host and native dependencies sorted out properly. There are a few stragglers, which can be recognized by the absence of NATDEPFILES lines in their `config/*/*.mh'.
Most of the work in making GDB compile on a new machine is in specifying
the configuration of the machine. This is done in a dizzying variety of
header files and configuration scripts, which we hope to make more
sensible soon. Let's say your new host is called an xxx (e.g.
`sun4'), and its full three-part configuration name is
xarch-xvend-xos (e.g. `sparc-sun-sunos4'). In
particular:
In the top level directory, edit `config.sub' and add xarch,
xvend, and xos to the lists of supported architectures,
vendors, and operating systems near the bottom of the file. Also, add
xxx as an alias that maps to
xarch-xvend-xos. You can test your changes by
running
./config.sub xxxand
./config.sub xarch-xvend-xos
which should both respond with xarch-xvend-xos
and no error messages.
Now, go to the `bfd' directory and create a new file `bfd/hosts/h-xxx.h'. Examine the other `h-*.h' files as templates, and create one that brings in the right include files for your system, and defines any host-specific macros needed by BFD, the Binutils, GNU LD, or the Opcodes directories. (They all share the bfd `hosts' directory and the `configure.host' file.)
Then edit `bfd/configure.host'. Add a line to recognize your
xarch-xvend-xos configuration, and set
my_host to xxx when you recognize it. This will cause your
file `h-xxx.h' to be linked to `sysdep.h' at configuration
time. When creating the line that recognizes your configuration,
only match the fields that you really need to match; e.g. don't
match the architecture or manufacturer if the OS is sufficient
to distinguish the configuration that your `h-xxx.h' file supports.
Don't match the manufacturer name unless you really need to.
This should make future ports easier.
Also, if this host requires any changes to the Makefile, create a file `bfd/config/xxx.mh', which includes the required lines.
It's possible that the `libiberty' and `readline' directories won't need any changes for your configuration, but if they do, you can change the `configure.in' file there to recognize your system and map to an `mh-xxx' file. Then add `mh-xxx' to the `config/' subdirectory, to set any makefile variables you need. The only current options in there are things like `-DSYSV'. (This `mh-xxx' naming convention differs from elsewhere in GDB, by historical accident. It should be cleaned up so that all such files are called `xxx.mh'.)
Aha! Now to configure GDB itself! Edit
`gdb/configure.in' to recognize your system and set gdb_host
to xxx, and (unless your desired target is already available) also
set gdb_target to something appropriate (for instance,
xxx). To handle new hosts, modify the segment after the comment
`# per-host'; to handle new targets, modify after `#
per-target'.
Finally, you'll need to specify and define GDB's host-, native-, and target-dependent `.h' and `.c' files used for your configuration; the next two chapters discuss those.
Once you have specified a new configuration for your host (see section Adding a New Configuration), there are three remaining pieces to making GDB work on a new machine. First, you have to make it host on the new machine (compile there, handle that machine's terminals properly, etc). If you will be cross-debugging to some other kind of system that's already supported, you are done.
If you want to use GDB to debug programs that run on the new machine, you have to get it to understand the machine's object files, symbol files, and interfaces to processes; see section Adding a New Target and see section Adding a New Native Configuration
Several files control GDB's configuration for host systems:
XM_FILE= xm-xxx.h. You can also define CC,
REGEX and REGEX1, SYSV_DEFINE, XM_CFLAGS,
XM_ADD_FILES, XM_CLIBS, XM_CDEPS,
etc.; see `Makefile.in'.
XDEPFILES line
in `gdb/config/mh-xxx'.
There are some "generic" versions of routines that can be used by
various systems. These can be customized in various ways by macros
defined in your `xm-xxx.h' file. If these routines work for
the xxx host, you can just include the generic file's name (with
`.o', not `.c') in XDEPFILES.
Otherwise, if your machine needs custom support routines, you will need
to write routines that perform the same functions as the generic file.
Put them into xxx-xdep.c, and put xxx-xdep.o
into XDEPFILES.
Now, you are now ready to try configuring GDB to compile using your system as its host. From the top level (above `bfd', `gdb', etc), do:
./configure xxx --target=vxworks960
This will configure your system to cross-compile for VxWorks on the Intel 960, which is probably not what you really want, but it's a test case that works at this stage. (You haven't set up to be able to debug programs that run on xxx yet.)
If this succeeds, you can try building it all with:
make
Repeat until the program configures, compiles, links, and runs. When run, it won't be able to do much (unless you have a VxWorks/960 board on your network) but you will know that the host support is pretty well done.
Good luck! Comments and suggestions about this section are particularly welcome; send them to `bug-gdb@prep.ai.mit.edu'.
If you are making GDB run native on the xxx machine, you have plenty more work to do. Several files control GDB's configuration for native support:
There are some "generic" versions of routines that can be used by
various systems. These can be customized in various ways by macros
defined in your `nm-xxx.h' file. If these routines work for
the xxx host, you can just include the generic file's name (with
`.o', not `.c') in NATDEPFILES.
Otherwise, if your machine needs custom support routines, you will need
to write routines that perform the same functions as the generic file.
Put them into xxx-nat.c, and put xxx-nat.o
into NATDEPFILES.
ptrace call in a vanilla way.
register_addr(), see below.
Now that BFD is used to read core files, virtually all machines should
use coredep.c, and should just provide fetch_core_registers in
xxx-nat.c (or REGISTER_U_ADDR in nm-xxx.h).
nm-xxx.h file defines the macro
REGISTER_U_ADDR(addr, blockend, regno), it should be defined to
set addr to the offset within the `user'
struct of GDB register number regno. blockend is the
offset within the "upage" of u.u_ar0.
If REGISTER_U_ADDR is defined,
`coredep.c' will define the register_addr() function and use
the macro in it. If you do not define REGISTER_U_ADDR, but you
are using the standard fetch_core_registers(), you will need to
define your own version of register_addr(), put it into your
xxx-nat.c file, and be sure xxx-nat.o is in
the NATDEPFILES list. If you have your own
fetch_core_registers(), you may not need a separate
register_addr(). Many custom fetch_core_registers()
implementations simply locate the registers themselves.
When making GDB run native on a new operating system,
to make it possible to debug
core files, you will need to either write specific code for parsing your
OS's core files, or customize `bfd/trad-core.c'. First, use
whatever #include files your machine uses to define the struct of
registers that is accessible (possibly in the u-area) in a core file
(rather than `machine/reg.h'), and an include file that defines whatever
header exists on a core file (e.g. the u-area or a `struct core'). Then
modify trad_unix_core_file_p() to use these values to set up the
section information for the data segment, stack segment, any other
segments in the core file (perhaps shared library contents or control
information), "registers" segment, and if there are two discontiguous
sets of registers (e.g. integer and float), the "reg2" segment. This
section information basically delimits areas in the core file in a
standard way, which the section-reading routines in BFD know how to seek
around in.
Then back in GDB, you need a matching routine called
fetch_core_registers(). If you can use the generic one, it's in
`coredep.c'; if not, it's in your `xxx-nat.c' file.
It will be passed a char pointer to the entire "registers" segment,
its length, and a zero; or a char pointer to the entire "regs2"
segment, its length, and a 2. The routine should suck out the supplied
register values and install them into GDB's "registers" array.
(See section Defining a New Host or Target Architecture,
for more info about this.)
If your system uses `/proc' to control processes, and uses ELF format core files, then you may be able to use the same routines for reading the registers out of processes and out of core files.
For a new target called ttt, first specify the configuration as described in section Adding a New Configuration. If your new target is the same as your new host, you've probably already done that.
A variety of files specify attributes of the GDB target environment:
When adding support for a new target machine, there are various areas of support that might need change, or might be OK.
If you are using an existing object file format (a.out or COFF), there is probably little to be done. See `bfd/doc/bfd.texinfo' for more information on writing new a.out or COFF versions.
If you need to add a new object file format, you must first add it to
BFD. This is beyond the scope of this document right now. Basically
you must build a transfer vector (of type bfd_target), which will
mean writing all the required routines, and add it to the list in
`bfd/targets.c'.
You must then arrange for the BFD code to provide access to the debugging symbols. Generally GDB will have to call swapping routines from BFD and a few other BFD internal routines to locate the debugging information. As much as possible, GDB should not depend on the BFD internal data structures.
For some targets (e.g., COFF), there is a special transfer vector used to call swapping routines, since the external data structures on various platforms have different sizes and layouts. Specialized routines that will only ever be implemented by one object file format may be called directly. This interface should be described in a file `bfd/libxxx.h', which is included by GDB.
If you are adding a new operating system for an existing CPU chip, add a
`tm-xos.h' file that describes the operating system
facilities that are unusual (extra symbol table info; the breakpoint
instruction needed; etc). Then write a
`tm-xarch-xos.h' that just #includes
`tm-xarch.h' and `tm-xos.h'. (Now that we have
three-part configuration names, this will probably get revised to
separate the xos configuration from the xarch
configuration.)
To add other languages to GDB's expression parser, follow the following steps:
This should reside in a file `lang-exp.y'. Routines for building parsed expressions into a `union exp_element' list are in `parse.c'.
Since we can't depend upon everyone having Bison, and YACC produces parsers that define a bunch of global names, the following lines must be included at the top of the YACC parser, to prevent the various parsers from defining the same global names:
#define yyparse lang_parse #define yylex lang_lex #define yyerror lang_error #define yylval lang_lval #define yychar lang_char #define yydebug lang_debug #define yypact lang_pact #define yyr1 lang_r1 #define yyr2 lang_r2 #define yydef lang_def #define yychk lang_chk #define yypgo lang_pgo #define yyact lang_act #define yyexca lang_exca #define yyerrflag lang_errflag #define yynerrs lang_nerrs
At the bottom of your parser, define a struct language_defn and
initialize it with the right values for your language. Define an
initialize_lang routine and have it call
`add_language(lang_language_defn)' to tell the rest of GDB
that your language exists. You'll need some other supporting variables
and functions, which will be used via pointers from your
lang_language_defn. See the declaration of struct
language_defn in `language.h', and the other `*-exp.y' files,
for more information.
If you need new opcodes (that represent the operations of the language),
add them to the enumerated type in `expression.h'. Add support
code for these operations in eval.c:evaluate_subexp(). Add cases
for new opcodes in two functions from `parse.c':
prefixify_subexp() and length_of_subexp(). These compute
the number of exp_elements that a given operation takes up.
Add an enumerated identifier for your language to the enumerated type
enum language in `defs.h'.
Update the routines in `language.c' so your language is included. These routines include type predicates and such, which (in some cases) are language dependent. If your language does not appear in the switch statement, an error is reported.
Also included in `language.c' is the code that updates the variable
current_language, and the routines that translate the
language_lang enumerated identifier into a printable
string.
Update the function _initialize_language to include your language. This
function picks the default language upon startup, so is dependent upon
which languages that GDB is built for.
Update allocate_symtab in `symfile.c' and/or symbol-reading
code so that the language of each symtab (source file) is set properly.
This is used to determine the language to use at each stack frame level.
Currently, the language is set based upon the extension of the source
file. If the language can be better inferred from the symbol
information, please set the language of the symtab in the symbol-reading
code.
Add helper code to expprint.c:print_subexp() to handle any new
expression opcodes you have added to `expression.h'. Also, add the
printed representations of your operators to op_print_tab.
Add a call to lang_parse() and lang_error in
parse.c:parse_exp_1().
The user has the option of building GDB for some or all of the
languages. If the user decides to build GDB for the language
lang, then every file dependent on `language.h' will have the
macro _LANG_lang defined in it. Use #ifdefs to
leave out large routines that the user won't need if he or she is not
using your language.
Note that you do not need to do this in your YACC parser, since if GDB is not build for lang, then `lang-exp.tab.o' (the compiled form of your parser) is not linked into GDB at all.
See the file `configure.in' for how GDB is configured for different languages.
Add dependencies in `Makefile.in'. Make sure you update the macro
variables such as HFILES and OBJS, otherwise your code may
not get linked in, or, worse yet, it may not get tarred into the
distribution!
From the top level directory (containing `gdb', `bfd', `libiberty', and so on):
make -f Makefile.in gdb.tar.Z
This will properly configure, clean, rebuild any files that are
distributed pre-built (e.g. `c-exp.tab.c' or `refcard.ps'),
and will then make a tarfile. (If the top level directory has already
beenn configured, you can just do make gdb.tar.Z instead.)
This procedure requires:
makeinfo (texinfo2 level)
dvips
yacc or bison
sed, tar, etc.).
`gdb.texinfo' is currently marked up using the texinfo-2 macros, which are not yet a default for anything (but we have to start using them sometime).
For making paper, the only thing this implies is the right generation of `texinfo.tex' needs to be included in the distribution.
For making info files, however, rather than duplicating the texinfo2
distribution, generate `gdb-all.texinfo' locally, and include the files
`gdb.info*' in the distribution. Note the plural; makeinfo will
split the document into one overall file and five or so included files.
GDB has three types of symbol tables.
This section describes partial symbol tables.
A psymtab is constructed by doing a very quick pass over an executable file's debugging information. Small amounts of information are extracted -- enough to identify which parts of the symbol table will need to be re-read and fully digested later, when the user needs the information. The speed of this pass causes GDB to start up very quickly. Later, as the detailed rereading occurs, it occurs in small pieces, at various times, and the delay therefrom is mostly invisible to the user. (See section Symbol Reading.)
The symbols that show up in a file's psymtab should be, roughly, those visible to the debugger's user when the program is not running code from that file. These include external symbols and types, static symbols and types, and enum values declared at file scope.
The psymtab also contains the range of instruction addresses that the full symbol table would represent.
The idea is that there are only two ways for the user (or much of the code in the debugger) to reference a symbol:
find_pc_function, find_pc_line, and other find_pc_...
functions handle this.
lookup_symbol does most of the work here.
The only reason that psymtabs exist is to cause a symtab to be read in at the right moment. Any symbol that can be elided from a psymtab, while still causing that to happen, should not appear in it. Since psymtabs don't have the idea of scope, you can't put local symbols in them anyway. Psymtabs don't have the idea of the type of a symbol, either, so types need not appear, unless they will be referenced by name.
It is a bug for GDB to behave one way when only a psymtab has been read, and another way if the corresponding symtab has been read in. Such bugs are typically caused by a psymtab that does not contain all the visible symbols, or which has the wrong instruction address ranges.
The psymtab for a particular section of a symbol-file (objfile) could be thrown away after the symtab has been read in. The symtab should always be searched before the psymtab, so the psymtab will never be used (in a bug-free environment). Currently, psymtabs are allocated on an obstack, and all the psymbols themselves are allocated in a pair of large arrays on an obstack, so there is little to be gained by trying to free them unless you want to do a lot more work.
Fundamental Types (e.g., FT_VOID, FT_BOOLEAN).
These are the fundamental types that gdb uses internally. Fundamental types from the various debugging formats (stabs, ELF, etc) are mapped into one of these. They are basically a union of all fundamental types that gdb knows about for all the languages that gdb knows about.
Type Codes (e.g., TYPE_CODE_PTR, TYPE_CODE_ARRAY).
Each time gdb builds an internal type, it marks it with one of these types. The type may be a fundamental type, such as TYPE_CODE_INT, or a derived type, such as TYPE_CODE_PTR which is a pointer to another type. Typically, several FT_* types map to one TYPE_CODE_* type, and are distinguished by other members of the type struct, such as whether the type is signed or unsigned, and how many bits it uses.
Builtin Types (e.g., builtin_type_void, builtin_type_char).
These are instances of type structs that roughly correspond to fundamental types and are created as global types for gdb to use for various ugly historical reasons. We eventually want to eliminate these. Note for example that builtin_type_int initialized in gdbtypes.c is basically the same as a TYPE_CODE_INT type that is initialized in c-lang.c for an FT_INTEGER fundamental type. The difference is that the builtin_type is not associated with any particular objfile, and only one instance exists, while c-lang.c builds as many TYPE_CODE_INT types as needed, with each one associated with some particular objfile.
BFD provides support for GDB in several ways:
GDB reads symbols from "symbol files". The usual symbol file is the file containing the program which gdb is debugging. GDB can be directed to use a different file for symbols (with the "symbol-file" command), and it can also read more symbols via the "add-file" and "load" commands, or while reading symbols from shared libraries.
Symbol files are initially opened by `symfile.c' using the BFD
library. BFD identifies the type of the file by examining its header.
symfile_init then uses this identification to locate a
set of symbol-reading functions.
Symbol reading modules identify themselves to GDB by calling
add_symtab_fns during their module initialization. The argument
to add_symtab_fns is a struct sym_fns which contains
the name (or name prefix) of the symbol format, the length of the prefix,
and pointers to four functions. These functions are called at various
times to process symbol-files whose identification matches the specified
prefix.
The functions supplied by each module are:
xxx_symfile_init(struct sym_fns *sf)
Called from symbol_file_add when we are about to read a new
symbol file. This function should clean up any internal state
(possibly resulting from half-read previous files, for example)
and prepare to read a new symbol file. Note that the symbol file
which we are reading might be a new "main" symbol file, or might
be a secondary symbol file whose symbols are being added to the
existing symbol table.
The argument to xxx_symfile_init is a newly allocated
struct sym_fns whose bfd field contains the BFD
for the new symbol file being read. Its private field
has been zeroed, and can be modified as desired. Typically,
a struct of private information will be malloc'd, and
a pointer to it will be placed in the private field.
There is no result from xxx_symfile_init, but it can call
error if it detects an unavoidable problem.
xxx_new_init()
Called from symbol_file_add when discarding existing symbols.
This function need only handle
the symbol-reading module's internal state; the symbol table data
structures visible to the rest of GDB will be discarded by
symbol_file_add. It has no arguments and no result.
It may be called after xxx_symfile_init, if a new symbol
table is being read, or may be called alone if all symbols are
simply being discarded.
xxx_symfile_read(struct sym_fns *sf, CORE_ADDR addr, int mainline)
Called from symbol_file_add to actually read the symbols from a
symbol-file into a set of psymtabs or symtabs.
sf points to the struct sym_fns originally passed to
xxx_sym_init for possible initialization. addr is the
offset between the file's specified start address and its true address
in memory. mainline is 1 if this is the main symbol table being
read, and 0 if a secondary symbol file (e.g. shared library or
dynamically loaded file) is being read.
In addition, if a symbol-reading module creates psymtabs when
xxx_symfile_read is called, these psymtabs will contain a pointer to
a function xxx_psymtab_to_symtab, which can be called from
any point in the GDB symbol-handling code.
xxx_psymtab_to_symtab (struct partial_symtab *pst)
Called from psymtab_to_symtab (or the PSYMTAB_TO_SYMTAB
macro) if the psymtab has not already been read in and had its
pst->symtab pointer set. The argument is the psymtab
to be fleshed-out into a symtab. Upon return, pst->readin
should have been set to 1, and pst->symtab should contain a
pointer to the new corresponding symtab, or zero if there
were no symbols in that part of the symbol file.
Cleanups are a structured way to deal with things that need to be done
later. When your code does something (like malloc some memory, or open
a file) that needs to be undone later (e.g. free the memory or close
the file), it can make a cleanup. The cleanup will be done at some
future point: when the command is finished, when an error occurs, or
when your code decides it's time to do cleanups.
You can also discard cleanups, that is, throw them away without doing what they say. This is only done if you ask that it be done.
Syntax:
struct cleanup *old_chain;
old_chain = make_cleanup (function, arg);
char *) later. The result, old_chain, is a handle that can be
passed to do_cleanups or discard_cleanups later. Unless you are
going to call do_cleanups or discard_cleanups yourself,
you can ignore the result from make_cleanup.
do_cleanups (old_chain);
make_cleanup returned old_chain.
E.g.:
make_cleanup (a, 0); old = make_cleanup (b, 0); do_cleanups (old);will call
b() but will not call a(). The cleanup that calls a() will remain
in the cleanup chain, and will be done later unless otherwise discarded.
discard_cleanups (old_chain);
do_cleanups except that it just removes the cleanups from the
chain and does not call the specified functions.
Some functions, e.g. fputs_filtered() or error(), specify that they
"should not be called when cleanups are not in place". This means
that any actions you need to reverse in the case of an error or
interruption must be on the cleanup chain before you call these functions,
since they might never return to your code (they `longjmp' instead).
Output that goes through printf_filtered or fputs_filtered or
fputs_demangled needs only to have calls to wrap_here added
in places that would be good breaking points. The utility routines
will take care of actually wrapping if the line width is exceeded.
The argument to wrap_here is an indentation string which is printed
only if the line breaks there. This argument is saved away and used
later. It must remain valid until the next call to wrap_here or
until a newline has been printed through the *_filtered functions.
Don't pass in a local variable and then return!
It is usually best to call wrap_here() after printing a comma or space.
If you call it before printing a space, make sure that your indentation
properly accounts for the leading space that will print if the line wraps
there.
Any function or set of functions that produce filtered output must finish
by printing a newline, to flush the wrap buffer, before switching to
unfiltered ("printf") output. Symbol reading routines that print
warnings are a good example.
A frame is a construct that GDB uses to keep track of calling and called functions.
FRAME_FP
create_new_frame (read_register (FP_REGNUM), read_pc ()));
Other than that, all the meaning imparted to FP_REGNUM is imparted by
the machine-dependent code. So, FP_REGNUM can have any value that
is convenient for the code that creates new frames. (create_new_frame
calls INIT_EXTRA_FRAME_INFO if it is defined; that is where you should
use the FP_REGNUM value, if your frames are nonstandard.)
FRAME_CHAIN
INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for
the new frame.
GDB's file `remote.c' talks a serial protocol to code that runs in the target system. GDB provides several sample "stubs" that can be integrated into target programs or operating systems for this purpose; they are named `*-stub.c'.
The GDB user's manual describes how to put such a stub into your target code. What follows is a discussion of integrating the SPARC stub into a complicated operating system (rather than a simple program), by Stu Grossman, the author of this stub.
The trap handling code in the stub assumes the following upon entry to trap_low:
As long as your trap handler can guarantee those conditions, then there is no
reason why you shouldn't be able to `share' traps with the stub. The stub has
no requirement that it be jumped to directly from the hardware trap vector.
That is why it calls exceptionHandler(), which is provided by the external
environment. For instance, this could setup the hardware traps to actually
execute code which calls the stub first, and then transfers to its own trap
handler.
For the most point, there probably won't be much of an issue with `sharing'
traps, as the traps we use are usually not used by the kernel, and often
indicate unrecoverable error conditions. Anyway, this is all controlled by a
table, and is trivial to modify.
The most important trap for us is for ta 1. Without that, we
can't single step or do breakpoints. Everything else is unnecessary
for the proper operation of the debugger/stub.
From reading the stub, it's probably not obvious how breakpoints work. They are simply done by deposit/examine operations from GDB.
GDB has support for figuring out that the target is doing a
longjmp and for stopping at the target of the jump, if we are
stepping. This is done with a few specialized internal breakpoints,
which are visible in the maint info breakpoint command.
To make this work, you need to define a macro called
GET_LONGJMP_TARGET, which will examine the jmp_buf
structure and extract the longjmp target address. Since jmp_buf
is target specific, you will need to define it in the appropriate
`tm-xxx.h' file. Look in `tm-sun4os4.h' and
`sparc-tdep.c' for examples of how to do this.
GDB is generally written using the GNU coding standards, as described in `standards.texi', which is available for anonymous FTP from GNU archive sites. There are some additional considerations for GDB maintainers that reflect the unique environment and style of GDB maintenance. If you follow these guidelines, GDB will be more consistent and easier to maintain.
GDB's policy on the use of prototypes is that prototypes are used to declare functions but never to define them. Simple macros are used in the declarations, so that a non-ANSI compiler can compile GDB without trouble. The simple macro calls are used like this:
extern int memory_remove_breakpoint PARAMS ((CORE_ADDR, char *));
Note the double parentheses around the parameter types. This allows an arbitrary number of parameters to be described, without freaking out the C preprocessor. When the function has no parameters, it should be described like:
void noprocess PARAMS ((void));
The PARAMS macro expands to its argument in ANSI C, or to a simple
() in traditional C.
All external functions should have a PARAMS declaration in a
header file that callers include. All static functions should have such
a declaration near the top of their source file.
We don't have a gcc option that will properly check that these rules have been followed, but it's GDB policy, and we periodically check it using the tools available (plus manual labor), and clean up any remnants.
In addition to getting the syntax right, there's the little question of semantics. Some things are done in certain ways in GDB because long experience has shown that the more obvious ways caused various kinds of trouble. In particular:
SWAP_TARGET_AND_HOST in GDB,
or one of the swap routines defined in `bfd.h', such as bfd_get_32.
target_ops vector.
#ifdef's will be frowned upon. It's much better
to write the code portably than to conditionalize it for various systems.
#ifdef's which test for specific compilers or manufacturers
or operating systems are unacceptable. All #ifdef's should test
for features. The information about which configurations contain which
features should be segregated into the configuration files. Experience
has proven far too often that a feature unique to one particular system
often creeps into other systems; and that a conditional based on
some predefined macro for your current system will become worthless
over time, as new versions of your system come out that behave differently
with regard to this feature.
#ifdef WRANGLE_SIGNALS WRANGLE_SIGNALS (signo); #endif
In your host, target, or native configuration file, as appropriate,
define WRANGLE_SIGNALS to do the machine-dependent thing. Take
a bit of care in defining the hook, so that it can be used by other
ports in the future, if they need a hook in the same place.
If the hook is not defined, the code should do whatever "most" machines
want. Using #ifdef, as above, is the preferred way to do this,
but sometimes that gets convoluted, in which case use
#ifndef SPECIAL_FOO_HANDLING #define SPECIAL_FOO_HANDLING(pc, sp) (0) #endif
where the macro is used or in an appropriate header file.
Whether to include a small hook, a hook around the exact pieces of
code which are system-dependent, or whether to replace a whole function
with a hook depends on the case. A good example of this dilemma can be
found in get_saved_register. All machines that GDB 2.8 ran on
just needed the FRAME_FIND_SAVED_REGS hook to find the saved
registers. Then the SPARC and Pyramid came along, and
HAVE_REGISTER_WINDOWS and REGISTER_IN_WINDOW_P were
introduced. Then the 29k and 88k required the GET_SAVED_REGISTER
hook. The first three are examples of small hooks; the latter replaces
a whole function. In this specific case, it is useful to have both
kinds; it would be a bad idea to replace all the uses of the small hooks
with GET_SAVED_REGISTER, since that would result in much
duplicated code. Other times, duplicating a few lines of code here or
there is much cleaner than introducing a large number of small hooks.
Another way to generalize GDB along a particular interface is with an attribute struct. For example, GDB has been generalized to handle multiple kinds of remote interfaces -- not by #ifdef's everywhere, but by defining the "target_ops" structure and having a current target (as well as a stack of targets below it, for memory references). Whenever something needs to be done that depends on which remote interface we are using, a flag in the current target_ops structure is tested (e.g. `target_has_stack'), or a function is called through a pointer in the current target_ops structure. In this way, when a new remote interface is added, only one module needs to be touched -- the one that actually implements the new remote interface. Other examples of attribute-structs are BFD access to multiple kinds of object file formats, or GDB's access to multiple source languages.
Please avoid duplicating code. For example, in GDB 3.x all the code
interfacing between ptrace and the rest of GDB was duplicated in
`*-dep.c', and so changing something was very painful. In GDB 4.x,
these have all been consolidated into `infptrace.c'.
`infptrace.c' can deal with variations between systems the same way
any system-independent file would (hooks, #if defined, etc.), and
machines which are radically different don't need to use infptrace.c at
all.
Thanks for thinking of offering your changes back to the community of GDB users. In general we like to get well designed enhancements. Thanks also for checking in advance about the best way to transfer the changes.
The two main problems with getting your patches in are,
I don't know how to get past these problems except by continuing to try.
There are two issues here -- technical and legal.
The legal issue is that to incorporate substantial changes requires a
copyright assignment from you and/or your employer, granting ownership
of the changes to the Free Software Foundation. You can get the
standard document for doing this by sending mail to
gnu@prep.ai.mit.edu and asking for it. I recommend that people
write in "All programs owned by the Free Software Foundation" as "NAME
OF PROGRAM", so that changes in many programs (not just GDB, but GAS,
Emacs, GCC, etc) can be contributed with only one piece of legalese
pushed through the bureacracy and filed with the FSF. I can't start
merging changes until this paperwork is received by the FSF (their
rules, which I follow since I maintain it for them).
Technically, the easiest way to receive changes is to receive each feature as a small context diff or unidiff, suitable for "patch". Each message sent to me should include the changes to C code and header files for a single feature, plus ChangeLog entries for each directory where files were modified, and diffs for any changes needed to the manuals (gdb/doc/gdb.texi or gdb/doc/gdbint.texi). If there are a lot of changes for a single feature, they can be split down into multiple messages.
In this way, if I read and like the feature, I can add it to the sources with a single patch command, do some testing, and check it in. If you leave out the ChangeLog, I have to write one. If you leave out the doc, I have to puzzle out what needs documenting. Etc.
The reason to send each change in a separate message is that I will not install some of the changes. They'll be returned to you with questions or comments. If I'm doing my job, my message back to you will say what you have to fix in order to make the change acceptable. The reason to have separate messages for separate features is so that other changes (which I am willing to accept) can be installed while one or more changes are being reworked. If multiple features are sent in a single message, I tend to not put in the effort to sort out the acceptable changes from the unacceptable, so none of the features get installed until all are acceptable.
If this sounds painful or authoritarian, well, it is. But I get a lot of bug reports and a lot of patches, and most of them don't get installed because I don't have the time to finish the job that the bug reporter or the contributor could have done. Patches that arrive complete, working, and well designed, tend to get installed on the day they arrive. The others go into a queue and get installed if and when I scan back over the queue -- which can literally take months sometimes. It's in both our interests to make patch installation easy -- you get your changes installed, and I make some forward progress on GDB in a normal 12-hour day (instead of them having to wait until I have a 14-hour or 16-hour day to spend cleaning up patches before I can install them).
Please send patches to bug-gdb@prep.ai.mit.edu, if they are less
than about 25,000 characters. If longer than that, either make them
available somehow (e.g. anonymous FTP), and announce it on
bug-gdb, or send them directly to the GDB maintainers at
gdb-patches@cygnus.com.
When GDB is configured and compiled, various macros are defined or left undefined, to control compilation based on the attributes of the host system. These macros and their meanings are:
NOTE: For now, both host and target conditionals are here. Eliminate target conditionals from this list as they are identified.
BLOCK_ADDRESS_FUNCTION_RELATIVE
GDBINIT_FILENAME
KERNELDEBUG
MEM_FNS_DECLARED
memcpy and memset. Define this
to avoid conflicts between the native include
files and the declarations in `defs.h'.
NO_SYS_FILE
PYRAMID_CONTROL_FRAME_DEBUGGING
SIGWINCH_HANDLER_BODY
ADDITIONAL_OPTIONS
ADDITIONAL_OPTION_CASES
ADDITIONAL_OPTION_HANDLER
ADDITIONAL_OPTION_HELP
ADDR_BITS_REMOVE
AIX_BUGGY_PTRACE_CONTINUE
ALIGN_STACK_ON_STARTUP
ALTOS
ALTOS_AS
ASCII_COFF
BADMAG
BCS
BEFORE_MAIN_LOOP_HOOK
BELIEVE_PCC_PROMOTION
BELIEVE_PCC_PROMOTION_TYPE
BITS_BIG_ENDIAN
BKPT_AT_MAIN
BLOCK_ADDRESS_ABSOLUTE
BPT_VECTOR
BREAKPOINT
BREAKPOINT_DEBUG
BROKEN_LARGE_ALLOCA
alloca's. For example, on sun's, Large alloca's fail
because the attempt to increase the stack limit in main() fails because
shared libraries are allocated just below the initial stack limit. The
SunOS kernel will not allow the stack to grow into the area occupied by
the shared libraries.
BSTRING
CALL_DUMMY
CALL_DUMMY_LOCATION
CALL_DUMMY_STACK_ADJUST
CANNOT_FETCH_REGISTER
CANNOT_STORE_REGISTER
CFRONT_PRODUCER
CHILD_PREPARE_TO_STORE
CLEAR_DEFERRED_STORES
CLEAR_SOLIB
COFF_ENCAPSULATE
COFF_FORMAT
CORE_NEEDS_RELOCATION
CPLUS_MARKER
CREATE_INFERIOR_HOOK
C_ALLOCA
C_GLBLREG
DBXREAD_ONLY
DBX_PARM_SYMBOL_CLASS
DEBUG
DEBUG_INFO
DEBUG_PTRACE
DECR_PC_AFTER_BREAK
DEFAULT_PROMPT
"(gdb) ").
DELTA88
DEV_TTY
DGUX
DISABLE_UNSETTABLE_BREAK
DONT_USE_REMOTE
DO_DEFERRED_STORES
DO_REGISTERS_INFO
EXTRACT_RETURN_VALUE
EXTRACT_STRUCT_VALUE_ADDRESS
EXTRA_FRAME_INFO
EXTRA_SYMTAB_INFO
FILES_INFO_HOOK
FLOAT_INFO
FOPEN_RB
FRAMELESS_FUNCTION_INVOCATION
FRAME_ARGS_ADDRESS_CORRECT
FRAME_CHAIN_COMBINE
FRAME_CHAIN_VALID
FRAME_CHAIN_VALID_ALTERNATE
FRAME_FIND_SAVED_REGS
FRAME_GET_BASEREG_VALUE
FRAME_NUM_ARGS
FRAME_SPECIFICATION_DYADIC
FUNCTION_EPILOGUE_SIZE
F_OK
GCC2_COMPILED_FLAG_SYMBOL
GCC_COMPILED_FLAG_SYMBOL
GCC_MANGLE_BUG
GCC_PRODUCER
GET_SAVED_REGISTER
GPLUS_PRODUCER
HANDLE_RBRAC
HAVE_MMAP
mmap for reading symbol
tables. For some machines this allows for sharing and quick updates.
HAVE_REGISTER_WINDOWS
HAVE_SIGSETMASK
HAVE_TERMIO
HEADER_SEEK_FD
HOSTING_ONLY
HOST_BYTE_ORDER
HPUX_ASM
HPUX_VERSION_5
HP_OS_BUG
I80960
IEEE_DEBUG
IEEE_FLOAT
IGNORE_SYMBOL
INIT_EXTRA_FRAME_INFO
INIT_EXTRA_SYMTAB_INFO
INIT_FRAME_PC
INNER_THAN
INT_MAX
INT_MIN
IN_GDB
IN_SIGTRAMP
IN_SOLIB_TRAMPOLINE
ISATTY
IS_TRAPPED_INTERNALVAR
KERNELDEBUG
KERNEL_DEBUGGING
KERNEL_U_ADDR
u structure (the "user struct",
also known as the "u-page") in kernel virtual memory. GDB needs to know
this so that it can subtract this address from absolute addresses in
the upage, that are obtained via ptrace or from core files. On systems
that don't need this value, set it to zero.
KERNEL_U_ADDR_BSD
u at runtime,
by using Berkeley-style nlist on the kernel's image in the root
directory.
KERNEL_U_ADDR_HPUX
u at runtime,
by using HP-style nlist on the kernel's image in the root
directory.
LCC_PRODUCER
LOG_FILE
LONGERNAMES
LONGEST
CC_HAS_LONG_LONG
PRINTF_HAS_LONG_LONG
LONG_MAX
LSEEK_NOT_LINEAR
L_LNNO32
L_SET
MACHKERNELDEBUG
MAINTENANCE
MAINTENANCE_CMDS
MALLOC_INCOMPATIBLE
malloc differs from the
ANSI definition.
MIPSEL
MMAP_BASE_ADDRESS
MMAP_INCREMENT
MONO
MOTOROLA
NBPG
NEED_POSIX_SETPGID
NEED_TEXT_START_END
NFAILURES
NORETURN
NOTDEF
NOTDEF
NOTDEF
NOTICE_SIGNAL_HANDLING_CHANGE
NO_HIF_SUPPORT
NO_JOB_CONTROL
NO_MMALLOC
mmalloc library for memory allocation for symbol
reading, unless this symbol is defined. Define it on systems
on which mmalloc does not
work for some reason. One example is the DECstation, where its RPC
library can't cope with our redefinition of malloc to call
mmalloc. When defining NO_MMALLOC, you will also have
to override the setting of MMALLOC_LIB to empty, in the Makefile.
Therefore, this define is usually set on the command line by overriding
MMALLOC_DISABLE in `config/*/*.mh', rather than by defining
it in `xm-*.h'.
NO_MMALLOC_CHECK
mmalloc, but don't want the overhead
of checking the heap with mmcheck.
NO_SIGINTERRUPT
NO_SINGLE_STEP
NS32K_SVC_IMMED_OPERANDS
NUMERIC_REG_NAMES
N_SETV
N_SET_MAGIC
NaN
ONE_PROCESS_WRITETEXT
O_BINARY
O_RDONLY
PC
PCC_SOL_BROKEN
PC_IN_CALL_DUMMY
PC_LOAD_SEGMENT
PRINT_RANDOM_SIGNAL
PRINT_REGISTER_HOOK
PRINT_TYPELESS_INTEGER
PROCESS_LINENUMBER_HOOK
PROLOGUE_FIRSTLINE_OVERLAP
PSIGNAL_IN_SIGNAL_H
PUSH_ARGUMENTS
PYRAMID_CONTROL_FRAME_DEBUGGING
PYRAMID_CORE
PYRAMID_PTRACE
REGISTER_BYTES
REGISTER_NAMES
REG_STACK_SEGMENT
REG_STRUCT_HAS_ADDR
RE_NREGS
R_FP
R_OK
SEEK_END
SEEK_SET
SEM
SET_STACK_LIMIT_HUGE
setrlimit and you have trouble with
stringtab in `dbxread.c'.
Also used in `fork-child.c' to return stack limits before child processes are forked.
SHELL_COMMAND_CONCAT
SHELL_FILE
SHIFT_INST_REGS
SIGN_EXTEND_CHAR
SIGTRAP_STOP_AFTER_LOAD
SKIP_PROLOGUE
SKIP_PROLOGUE_FRAMELESS_P
SKIP_TRAMPOLINE_CODE
SOLIB_ADD
SOLIB_CREATE_INFERIOR_HOOK
STACK_ALIGN
START_INFERIOR_TRAPS_EXPECTED
STOP_SIGNAL
STORE_RETURN_VALUE
SUN4_COMPILER_FEATURE
SUN_FIXED_LBRAC_BUG
SVR4_SHARED_LIBS
SWITCH_ENUM_BUG
SYM1
SYMBOL_RELOADING_DEFAULT
SYNTAX_TABLE
Sword
TDESC
TIOCGETC
TIOCGLTC
TIOCGPGRP
TIOCLGET
TIOCLSET
TIOCNOTTY
T_ARG
T_VOID
UINT_MAX
UPAGES
USER
USE_GAS
USE_O_NOCTTY
USE_STRUCT_CONVENTION
USG
USIZE
U_FPSTATE
VARIABLES_INSIDE_BLOCK
WRS_ORIG
_LANG_c
_LANG_m2
__GNUC__
__GO32__
__HPUX_ASM__
__INT_VARARGS_H
__not_on_pyr_yet
alloca
const
GOULD_PN
hp800
hpux
lint
longest_to_int
mc68020
notdef
ns32k_opcodeT
sgi
sparc
sun
sun386
test
ultrix
volatile
When GDB is configured and compiled, various macros are defined or left undefined, to control compilation based on the attributes of the target system. These macros and their meanings are:
NOTE: For now, both host and target conditionals are here. Eliminate host conditionals from this list as they are identified.
PUSH_DUMMY_FRAME
POP_FRAME
BLOCK_ADDRESS_FUNCTION_RELATIVE
KERNELDEBUG
NO_SYS_FILE
PYRAMID_CONTROL_FRAME_DEBUGGING
SIGWINCH_HANDLER_BODY
ADDITIONAL_OPTIONS
ADDITIONAL_OPTION_CASES
ADDITIONAL_OPTION_HANDLER
ADDITIONAL_OPTION_HELP
ADDR_BITS_REMOVE
ALIGN_STACK_ON_STARTUP
ALTOS
ALTOS_AS
ASCII_COFF
BADMAG
BCS
BEFORE_MAIN_LOOP_HOOK
BELIEVE_PCC_PROMOTION
BELIEVE_PCC_PROMOTION_TYPE
BITS_BIG_ENDIAN
BKPT_AT_MAIN
BLOCK_ADDRESS_ABSOLUTE
BPT_VECTOR
BREAKPOINT
BREAKPOINT_DEBUG
BSTRING
CALL_DUMMY
CALL_DUMMY_LOCATION
CALL_DUMMY_STACK_ADJUST
CANNOT_FETCH_REGISTER
CANNOT_STORE_REGISTER
CFRONT_PRODUCER
CHILD_PREPARE_TO_STORE
CLEAR_DEFERRED_STORES
CLEAR_SOLIB
COFF_ENCAPSULATE
COFF_FORMAT
CORE_NEEDS_RELOCATION
CPLUS_MARKER
CREATE_INFERIOR_HOOK
C_ALLOCA
C_GLBLREG
DBXREAD_ONLY
DBX_PARM_SYMBOL_CLASS
DEBUG
DEBUG_INFO
DEBUG_PTRACE
DECR_PC_AFTER_BREAK
DELTA88
DEV_TTY
DGUX
DISABLE_UNSETTABLE_BREAK
DONT_USE_REMOTE
DO_DEFERRED_STORES
DO_REGISTERS_INFO
END_OF_TEXT_DEFAULT
EXTRACT_RETURN_VALUE
EXTRACT_STRUCT_VALUE_ADDRESS
EXTRA_FRAME_INFO
EXTRA_SYMTAB_INFO
FILES_INFO_HOOK
FLOAT_INFO
FOPEN_RB
FP0_REGNUM
FPC_REGNUM
FP_REGNUM
FPU
FRAMELESS_FUNCTION_INVOCATION
FRAME_ARGS_ADDRESS_CORRECT
FRAME_CHAIN
FRAME_CHAIN_COMBINE
FRAME_CHAIN_VALID
FRAME_CHAIN_VALID_ALTERNATE
FRAME_FIND_SAVED_REGS
FRAME_GET_BASEREG_VALUE
FRAME_NUM_ARGS
FRAME_SPECIFICATION_DYADIC
FRAME_SAVED_PC
FUNCTION_EPILOGUE_SIZE
F_OK
GCC2_COMPILED_FLAG_SYMBOL
GCC_COMPILED_FLAG_SYMBOL
GCC_MANGLE_BUG
GCC_PRODUCER
GDB_TARGET_IS_HPPA
GDB_TARGET_IS_MACH386
GDB_TARGET_IS_SUN3
GDB_TARGET_IS_SUN386
GET_LONGJMP_TARGET
This macro determines the target PC address that longjmp() will jump to, assuming that we have just stopped at a longjmp breakpoint. It takes a CORE_ADDR * as argument, and stores the target PC value through this pointer. It examines the current state of the machine as needed.
GET_SAVED_REGISTER
GPLUS_PRODUCER
GR64_REGNUM
GR64_REGNUM
HANDLE_RBRAC
HAVE_68881
HAVE_REGISTER_WINDOWS
HAVE_SIGSETMASK
HAVE_TERMIO
HEADER_SEEK_FD
HOSTING_ONLY
HOST_BYTE_ORDER
HPUX_ASM
HPUX_VERSION_5
HP_OS_BUG
I80960
IBM6000_TARGET
IEEE_DEBUG
IEEE_FLOAT
IGNORE_SYMBOL
INIT_EXTRA_FRAME_INFO
INIT_EXTRA_SYMTAB_INFO
INIT_FRAME_PC
INNER_THAN
INT_MAX
INT_MIN
IN_GDB
IN_SIGTRAMP
IN_SOLIB_TRAMPOLINE
ISATTY
IS_TRAPPED_INTERNALVAR
KERNELDEBUG
KERNEL_DEBUGGING
LCC_PRODUCER
LOG_FILE
LONGERNAMES
LONGEST
CC_HAS_LONG_LONG
PRINTF_HAS_LONG_LONG
LONG_MAX
L_LNNO32
MACHKERNELDEBUG
MAINTENANCE
MIPSEL
MOTOROLA
NBPG
NEED_POSIX_SETPGID
NEED_TEXT_START_END
NFAILURES
NNPC_REGNUM
NOTDEF
NOTDEF
NOTDEF
NOTICE_SIGNAL_HANDLING_CHANGE
NO_HIF_SUPPORT
NO_SIGINTERRUPT
NO_SINGLE_STEP
NPC_REGNUM
NS32K_SVC_IMMED_OPERANDS
NUMERIC_REG_NAMES
N_SETV
N_SET_MAGIC
NaN
ONE_PROCESS_WRITETEXT
PC
PCC_SOL_BROKEN
PC_IN_CALL_DUMMY
PC_LOAD_SEGMENT
PC_REGNUM
PRINT_RANDOM_SIGNAL
PRINT_REGISTER_HOOK
PRINT_TYPELESS_INTEGER
PROCESS_LINENUMBER_HOOK
PROLOGUE_FIRSTLINE_OVERLAP
PSIGNAL_IN_SIGNAL_H
PS_REGNUM
PUSH_ARGUMENTS
REGISTER_BYTES
REGISTER_NAMES
REG_STACK_SEGMENT
REG_STRUCT_HAS_ADDR
RE_NREGS
R_FP
R_OK
SDB_REG_TO_REGNUM
SEEK_END
SEEK_SET
SEM
SHELL_COMMAND_CONCAT
SHELL_FILE
SHIFT_INST_REGS
SIGN_EXTEND_CHAR
SIGTRAP_STOP_AFTER_LOAD
SKIP_PROLOGUE
SKIP_PROLOGUE_FRAMELESS_P
SKIP_TRAMPOLINE_CODE
SOLIB_ADD
SOLIB_CREATE_INFERIOR_HOOK
SP_REGNUM
STAB_REG_TO_REGNUM
STACK_ALIGN
START_INFERIOR_TRAPS_EXPECTED
STOP_SIGNAL
STORE_RETURN_VALUE
SUN4_COMPILER_FEATURE
SUN_FIXED_LBRAC_BUG
SVR4_SHARED_LIBS
SWITCH_ENUM_BUG
SYM1
SYMBOL_RELOADING_DEFAULT
SYNTAX_TABLE
Sword
TARGET_BYTE_ORDER
TARGET_CHAR_BIT
TARGET_COMPLEX_BIT
TARGET_DOUBLE_BIT
TARGET_DOUBLE_COMPLEX_BIT
TARGET_FLOAT_BIT
TARGET_INT_BIT
TARGET_LONG_BIT
TARGET_LONG_DOUBLE_BIT
TARGET_LONG_LONG_BIT
TARGET_PTR_BIT
TARGET_READ_PC
TARGET_WRITE_PC
TARGET_READ_SP
TARGET_WRITE_SP
TARGET_READ_FP
TARGET_WRITE_FP
read_pc, write_pc,
read_sp, write_sp, read_fp and write_fp.
For most targets, these may be left undefined. GDB will call the
read and write register functions with the relevant _REGNUM argument.
These macros are useful when a target keeps one of these registers in a hard to get at place; for example, part in a segment register and part in an ordinary register.
TARGET_SHORT_BIT
TDESC
T_ARG
T_VOID
UINT_MAX
USER
USE_GAS
USE_STRUCT_CONVENTION
USIZE
U_FPSTATE
VARIABLES_INSIDE_BLOCK
WRS_ORIG
_LANG_c
_LANG_m2
__GO32__
__HPUX_ASM__
__INT_VARARGS_H
__not_on_pyr_yet
GOULD_PN
hp800
hpux
longest_to_int
mc68020
ns32k_opcodeT
sgi
sparc
sun
sun386
test
When GDB is configured and compiled, various macros are defined or left undefined, to control compilation when the host and target systems are the same. These macros should be defined (or left undefined) in `nm-system.h'.
ATTACH_DETACH
attach and
detach commands.
FETCH_INFERIOR_REGISTERS
fetch_inferior_registers and store_inferior_registers in
`HOST-nat.c'.
If this symbol is not defined, and `infptrace.c'
is included in this configuration, the default routines in
`infptrace.c' are used for these functions.
GET_LONGJMP_TARGET
This macro determines the target PC address that longjmp() will jump to, assuming that we have just stopped at a longjmp breakpoint. It takes a CORE_ADDR * as argument, and stores the target PC value through this pointer. It examines the current state of the machine as needed.
PROC_NAME_FMT
PTRACE_FP_BUG
PTRACE_ARG3_TYPE
ptrace system call, if it exists
and is different from int.
REGISTER_U_ADDR
USE_PROC_FS
U_REGS_OFFSET
FETCH_INFERIOR_REGISTERS is not defined). If the default value
from `infptrace.c' is good enough, leave it undefined.
The default value means that u.u_ar0 points to the location of the
registers. I'm guessing that #define U_REGS_OFFSET 0 means that
u.u_ar0 is the location of the registers.
Fragments of old code in GDB sometimes reference or set the following configuration macros. They should not be used by new code, and old uses should be removed as those parts of the debugger are otherwise touched.
STACK_END_ADDR
Any `foo-xdep.c' file that references STACK_END_ADDR is so old that it has never been converted to use BFD. Now that's old!
The IBM RS/6000 running AIX uses an object file format called xcoff. The COFF sections, symbols, and line numbers are used, but debugging symbols are dbx-style stabs whose strings are located in the `.debug' section (rather than the string table). For more information, See section 'Top' in The Stabs Debugging Format, and search for XCOFF.
The shared library scheme has a nice clean interface for figuring out what shared libraries are in use, but the catch is that everything which refers to addresses (symbol tables and breakpoints at least) needs to be relocated for both shared libraries and the main executable. At least using the standard mechanism this can only be done once the program has been run (or the core file has been read).